AI assistantsNew Guides Contact
06 71 02 13 06
Equipment

Buying or renting your till equipment: how to choose?

Equipping yourself with till equipment can be done in two ways: by owning the equipment outright, or through a leasing arrangement. Neither is inherently better. This guide presents the criteria to examine in order to decide with full knowledge of the facts, without going into figures, which are best compared on a quote.

6 min readOG Solutions Guide
Till equipment still packaged, ready to be installed in a business
In this guide
  1. What this choice really commits you to
  2. What each approach covers
  3. The criteria to examine before deciding
  4. Three situations to help you get your bearings
  5. Mistakes to avoid
  6. How to get a useful comparison

Once the list of equipment has been drawn up, another question arises: should you buy it or lease it? Both approaches exist, both are common, and they meet different situations. The question, then, is not which one is better, but which one matches your project.

This choice is often reduced to a comparison of amounts. That is a misleading shortcut: two businesses with the same equipment can reach opposite conclusions, because their timeframe, organization and priorities are not the same.

This guide gives no figures, no prices and no financial conditions: these elements depend on your configuration and are compared based on a quote. Instead, it offers you a reading grid, so you arrive at that comparison already knowing what you are looking for.

What this choice really commits you to

A till station is not a one-off purchase. It is a working tool used every day, for several years, and one that must remain operational at all times. A till that is down brings the business to a halt, which gives particular weight to seemingly secondary questions: what happens in the event of a breakdown, who replaces the equipment, and at what point do you decide to renew it.

The choice between buying and leasing therefore comes down to three things at once: ownership of the equipment, how the expense is organized over time, and who handles the equipment's lifecycle. These three dimensions do not always point in the same direction, and that is precisely what makes the decision less obvious than it looks.

It is useful to address this subject early, at the same time as defining your needs. A project whose horizon and likely developments are known is much easier to compare than a project that is still vague.

What each approach covers

As part of a logic ofpurchaseyou become the owner of the equipment. The equipment becomes part of your business assets, and you decide how long to use it, when to replace it, and whether to resell it. In exchange, managing the fleet falls to you: monitoring its condition, deciding on renewal, and covering replacements beyond the applicable warranties.

As part of a logic of rentalyou have use of the equipment without owning it. The equipment remains the property of a third party, and the contract sets out the conditions of use, support, and return or renewal. The exact terms vary from one offer to another: it is the content of the contract that matters, more than the label used.

What you are looking atPurchaseRental
Ownership of the equipmentThe equipment belongs to youYou have the equipment without owning it
Renewal decisionYou choose when to replaceRenewal is arranged through the contract
Breakdown and replacementTo be decided based on the warranties and the service contract subscribed toGenerally covered under the contract, to be checked point by point
Flexibility in case of changeDepends on your ability to resell or reassign the equipmentDepends on the clauses provided for evolving the fleet
Organising spendingEffort concentrated at start-upEffort spread out over time

This table describes principles, not universal rules. Each offer has its own terms, and two leasing contracts can be very different from one another.

The criteria to examine before deciding

Your project's time horizon

An established business, with stable activity and clear visibility over the coming years, does not think the same way as a new opening whose model will take shape as it goes. The more uncertain the horizon, the more flexibility weighs in the balance.

The business's planned growth

Are you considering a second till, an additional service, an expansion, a second point of sale? A fleet that is meant to grow cannot be managed like a fixed one. Check whether the approach chosen allows you to add equipment without starting from scratch.

Your attachment to ownership

Some shopkeepers are keen to own their work tools and to decide alone when to replace them. Others prefer not to deal with it. This is not a technical criterion, but it is a real one, and it often weighs more than people think.

Managing breakdowns and replacement

Ask the question in concrete terms: if a terminal breaks down on a Saturday, what happens? Who steps in, under what conditions, with what replacement equipment? The answer should come from the service contract, whichever approach is chosen. This is often where the practical difference plays out day to day.

Your preference in terms of cash flow

Without even talking about amounts, the principle differs: buying concentrates the effort at the time of installation, leasing spreads it out. Depending on your situation and your other projects, one or the other will be more comfortable. It's a matter of financial organization, not a universal calculation.

The possibility of changing activity or format

A business that might change format, move premises, or change its offering should examine what each approach allows in the event of change. Here too, the answer lies in the terms on offer.

Three situations to help you get your bearings

An opening with a model still to be confirmed

The retailer knows what they want to sell, but not yet how the point of sale will function day to day. Flexibility and the ability to evolve the equipment fleet then weigh more heavily than ownership of the equipment.

An established business replacing ageing equipment

Activity is well known, needs are stable, and the configuration will change little. The reasoning shifts toward the expected service life and toward maintenance conditions.

A multi-location project

When several locations are involved, the consistency of the equipment fleet and how it will be managed over time become subjects in their own right, often more decisive than the acquisition method itself.

Mistakes to avoid

Comparing only the initial effort. An honest comparison takes into account the whole life cycle: use, support, replacement, end of life. Stopping at the first visible figure often leads to an unpleasant surprise later on.

Not reading what the service contract covers. Support, on-site intervention, equipment replacement: these elements are not automatically tied to the acquisition method. They must be checked line by line, in both cases.

Forgetting the software. Equipment is only one part of the project. The till software, its configuration, and its support follow their own logic. Treating the two separately distorts the comparison.

Deciding before having defined the need. As long as the equipment list isn't finalized, the comparison concerns a fuzzy object. It's better to define what you need, then look at how you get it.

Accounting treatment and administrative consequences may differ depending on the approach chosen and on your situation. Applicable requirements may change over time. Check the rules that concern your situation with the relevant authorities and your usual advisor.

How to get a useful comparison

A numerical comparison only makes sense once the need has been defined: equipment list, number of tills, desired level of support, expected time horizon. With these elements, you can request a proposal for each approach and place them side by side on an identical basis. It's the only way to get figures that mean something for your business.

To prepare for this step, you can start again from the page purchase or leasing and your equipment list. OG Solutions analyzes the need expressed, then selects and configures the suitable solution from among the technologies it integrates, and presents the corresponding equipment arrangements in the quote.

Key takeaway

  • Neither buying nor leasing is inherently superior: the right choice depends on the project's time horizon and how the business is going to evolve.
  • Three dimensions are decided at the same time: ownership of the equipment, the spread of the financial effort over time, and who takes care of breakdowns and replacement.
  • Support and replacement terms should be checked contract in hand, whichever approach is chosen.
  • The comparison only becomes reliable once the need has been defined: the same equipment list, the same number of tills, the same level of service.
  • Amounts and terms cannot be guessed: they are compared through quotes, for your exact configuration.
Next stepContinue this reading in the direction of your project.
Frequently asked questions

Your questions on this topic

La location revient-elle plus cher que l'achat ?
Cela ne peut pas se dire dans l'absolu. Les deux approches ne recouvrent pas les mêmes prestations ni le même cycle de vie du matériel, ce qui rend toute règle générale trompeuse. La seule comparaison fiable se fait sur devis, à partir de la même liste d'équipements et du même niveau de service.
Peut-on changer d'avis après avoir choisi ?
Cela dépend entièrement des conditions proposées et du moment où la question se pose. C'est justement un point à aborder avant de signer : demandez ce qui est prévu si votre activité change, si vous ajoutez un poste ou si vous déménagez. Une réponse claire avant la décision vaut mieux qu'une découverte après.
Is the equipment replaced in case of breakdown?
Cela relève du contrat de service, et non du mode d'acquisition en lui-même. Achat comme location peuvent s'accompagner de conditions d'assistance très différentes. Demandez précisément ce qui est couvert, dans quels délais et dans quelles conditions on intervient.
Does the till software follow the same model as the equipment?
Not necessarily. Software and equipment follow different logics and can be offered separately. It is useful to ask how each is handled in the proposal you are given, in order to compare equivalent packages.
What should I do if I don't yet know how my business will evolve?
C'est une situation fréquente et ce n'est pas un problème en soi. Dans ce cas, la souplesse devient un critère central : privilégiez ce qui vous permet d'ajouter, de modifier ou de réduire sans repartir de zéro. Expliquez cette incertitude lors de l'étude, elle fait partie des données du projet.
To go further

Related guides

View all guides
Your project

The guides help you understand.
We help you configure it.

Describe your business and your needs. OG Solutions prepares a configuration tailored to you.

Talk to an advisor
Esc